Important information about purchasing from the US.

If you see a price that looks too good to be true, it probably is! Beware of counterfeit goods. Check our website to make sure you’re purchasing from an authorized RØDE reseller. For quick reference NO FBA reseller (FULFILLMENT BY AMAZON) on Amazon is authorized. You can view a current list of unauthorized US dealers here.

VideoMic NTG

카메라 부착형 샷건 마이크

VideoMic NTG 비디오 플레이리스트 보기
VideoMic NTG 비디오 플레이리스트 보기
VideoMic NTG 사진

This Changes Everything | VideoMic NTG

VideoMic NTG - Firmware Update

Features and Specifications of the VideoMic NTG On-Camera Shotgun Microphones

Introducing the RØDE VideoMic NTG

Find an authorised RØDE dealer

United states

모든 소매업체 보기

VideoMic NTG를 추천 온라인 소매업체로부터 구매하십시오. United states

지역을 변경해 주십시오

29 판매 온라인 소매업체 VideoMic NTG

  • 비견할 데 없는 투명한 음향과 있는 그대로의 자연스러운 사운드를 전달하는 혁신적 음향 디자인.
  • 지향성 강한 슈퍼카디오이드 폴라 패턴과 매우 플랫한 주파수 응답
  • 독보적인 무한 가변 게인 제어
  • 카메라 및 모바일 장치와 연결되는 3.5mm 자동 감지 출력
  • 매끄러운 오디오 모니터링을 위한 클래스 호환 USB-C 출력과 헤드폰
  • 하이패스 필터, 패드, 고주파 부스트 및 안전 채널을 제어하는 디지털 스위칭
  • dB 피크 경고등
  • 내장형 충전식 리튬 이온 배터리로 30시간 이상 녹화 가능, USB-C로 충전
  • 케이블 관리 및 카메라 콜드슈 상의 마이크 배치 조정에 필요한 슬라이딩 레일을 갖춘 고품질 Rycote® Lyre® 쇼크 마운팅.
  • 경량(94g)에 견고한 항공우주 등급 알루미늄 구조

VideoMic NTG는 카메라 사용에 최적화된 방송 등급 샷건 마이크입니다. NTG5 브로드캐스트 샷건 마이크와 동일한 혁신적인 음향 설계로 독보적인 투명한 음질과 있는 그대로의 자연스러운 음향을 제공합니다. 더불어 놀라울 만큼 플랫한 주파수 응답, 지향성 초지향성 수음 패턴 및 현저히 낮은 자체 잡음으로 세계 최고의 샷건 마이크 제품과 어깨를 나란히 하는 컴팩트한 카메라 부착형 마이크를 제공합니다.

뛰어난 사운드는 물론이며 다양한 도구와 기능으로 유연한 사용성을 자랑하는 VideoMic NTG는 모든 레코딩 상황에서 활용할 수 있습니다. 디지털 스위칭으로 하이패스 필터, -20dB 패드, 고주파 부스트 및 안전 채널에 접속할 수 있으며, 추가로 필요에 따라 출력을 정밀하게 조정할 수 있는 독보적인 무한 가변 게인 제어 기능이 있습니다. 3.5mm 자동 감지 출력은 연결된 장치(카메라 또는 모바일)가 무엇인지 감지하고 변경해주어 이제는 어댑터 케이블로 어려움을 겪지 않아도 됩니다! 편리하고 새로운 dB 피크 경고등도 있어 오디오가 잘리지 않는지 상시 확인할 수 있습니다.

VideoMic NTG는 단순한 카메라 부착형 마이크 이상의 제품입니다. VideoMic NTG는 DSLR, 콤팩트 카메라 및 스마트폰(붐 마이크로 카메라에 부착하거나 피스톨 그립에 부착)과 완벽하게 페어링 될 뿐만 아니라 컴퓨터, 태블릿, 스마트폰 등에 연결할 수 있는 모든 기능을 갖춘 USB 마이크입니다. 이에 더해 3.5mm 잭은 USB 입력 사용하는 동안 헤드폰 출력으로 활용하여 오디오 모니터링이 가능합니다.

VideoMic NTG 제품 사양
VideoMic NTG 제품 사양
Acoustic Principle

Pressure gradient electret condenser

Polar Pattern


Frequency Range

20Hz – 20kHz

Frequency Response

35Hz – 18kHz ±3 dB

Output Impedance


Signal to noise Ratio

79 dBA

Dynamic Range

105dB SPL (A-weighted, as per IEC651)

Equivalent Noise

15dB SPL (A-weighted, as per IEC651)


-26 dB re 1V/Pa (50mV @ 94dB SPL) ± 1dB @ 1kHz

Input SPL @ 1% THD

120dB SPL

High Pass Filter Frequency

75Hz, 150Hz

Battery Life

30+ hours

Battery Capacity


Output Connection

3.5mm auto-sensing USB-C

Bit Depth


Sample Rates


OS Requirements

Mac OS 10.12

Windows 10

Weight (g)



Diameter: 21.6mm

Length: 171mm

VideoMic NTG 비디오 플레이리스트 보기
VideoMic NTG 비디오 플레이리스트 보기
VideoMic NTG 지원
자주 묻는 질문
  • What is the VideoMic NTG’s auto-power feature?+
    • The auto-power feature was first introduced to the VideoMic range with the VideoMic Pro+. It is a handy function that automatically turns the microphone off when it detects that the camera is switched off, helping conserve battery life, and turns it on when the camera is turned on, so that you never have to worry about missing a take. The auto-power function only works if your camera delivers plug-in power (most do), as this is what tells the microphone if it is on or off, or if you are using the microphone in USB audio mode. The VideoMic NTG also features a power button, so that it can be manually powered on and off. Check out our list of cameras that deliver plug-in power here.

  • What does the auto-sensing feature do?+
    • The auto-sensing output is an intelligent feature that seamlessly detects whether your microphone is plugged into a TRS input, like those on most cameras, or a TRRS input, which most smartphones and tablets have, and switches the output to accommodate. This means you don’t have to worry about using TRS to TRRS adaptor cables – the SC10 cable that accompanies the VideoMic NTG will work seamlessly with any device. However, if your device has a Lightning®  connector or anything other than a 3.5mm input, you will need to use an adaptor.

  • What does the infinitely variable gain control do?+
    • The infinitely variable gain control is a knob on the rear of the microphone that allows you to precisely tailor the output level to your recording device. This is an active control that has a greater output range than any other microphone on the market – it can deliver anything from mic level signal all the way to a headphone level output, which is particularly useful when using the 3.5mm jack as a headphone output. Where other microphones simply employ a pad to adjust the output, the VideoMic NTG’s control also actively amplifies the signal at various gain stages, resulting in a cleaner audio with a vastly improved signal-to-noise ratio (it essentially does all the hard work so your camera’s lower-quality internal preamp doesn’t have to, lowering the noise floor of your signal).

  • How long does it take for the battery to fully recharge?+
    • 2 hours from empty to full.

  • How should I set the output level of the VideoMic NTG?+
    • When connected to a camera or smartphone, we recommend you turn down the gain of your camera to, or close to, its lowest setting, and turn off any automatic gain controls that may be activated. Then, starting from the lowest setting, turn up the infinitely variable gain control on the VideoMic NTG until your meters are showing a good level (usually just starting to touch the yellow, or about halfway) when recording your expected sound source. Where possible, monitor your audio using headphones, to ensure your sound is clean and clear.

  • What are the physical controls and lights on the VideoMic NTG and how do they work?+
    • There are three physical controls on the VideoMic-NTG:

      • The first is the infinitely variable gain control on the rear of the mic, which delivers a wide output range (numbered 1–15). You can use this to precisely tailor the output level to best match for your device.
      • The next button is the power/function control. By default, the mic will auto-power on when connected to a device and power off when disconnected from a device, but you can also turn the mic on/off manually by holding this button for three seconds. A single press on this button will engage the -20dB pad (left LED illuminates), another press will engage the safety channel (left LED off, middle LED illuminates), and third press will engage both functions (left and middle LEDs illuminate). A final press will disengage both functions. The right LED is the dB peak warning light, which will illuminate red when the mic’s internal preamp is clipping, at which point the pad should be engaged.
      • The final button is the filter control. Pressing this once will engage the 75Hz high-pass filter (left Led illuminates). Pressing it again will select the 150Hz filter (middle LED illuminates). A third press will disengage the high-pass filters (left and middle LEDs off). A long press (3 seconds) will engage the high frequency boost (right LED illuminates). This can be used in conjunction with the high-pass filters. Another long press will disengage the high boost.
      • There is also battery power status indicator. Green indicates the battery is fully charged, amber indicates medium charge, red indicates low charge, and blinking red indicates very low charge.
      • This LED also indicates charging status when the mic is connected to a power source. When connected to a computer, green indicates it is fully charged; blue indicates it is charging. When connected to a power bank or USB power adapter, the LED maintains the red/amber/green behaviour above. If the power LED triple blinks red, this means that mic has detected it is outside its operating temperature range. 
  • What is the VideoMic NTG’s noise floor?+
    • The VideoMic NTG has extremely low self-noise for a microphone of this type (15dBA). All the RØDE VideoMics have extremely low self-noise; in fact, the VideoMic Pro and VideoMic Pro+ are actually slightly quieter than the VideoMic NTG. It’s worth comparing the VideoMic NTG to other on-camera microphones for reference as to how quiet all RØDE microphones are.

  • With other VideoMics, it is recommend that I lower the gain on my camera as much as possible and use the gain controls on the mic to boost the signal. Is this still the recommended setting on the VideoMic NTG?+
    • Yes, this is the same for the VideoMic NTG. We’ve designed the output level to be similar to the VideoMic Pro+ when the gain knob is set to 10. This is the best place to start with any device, and adjust the level up or down from there. With any VideoMic, the best results are generally achieved when the camera preamp is being driven as little as possible.

  • Does the VideoMic NTG have a standby mode?+
    • There isn’t a standby mode on the VideoMic NTG, it’s either off and not drawing any power, or it’s completely on. When the microphone is off it will last months without the need to charge.

  • When the safety channel is engaged on the VideoMic NTG, is any difference between the two channels?+
    • There is no difference in the sonic characteristics of the safety channel, it is just 20dB lower than the main channel. However, when you boost the safety channel in post-production, you may notice some preamp noise from your camera, which may affect the perceived audio quality. The safety channel should ideally be used to replace the small piece of audio that has clipped, and it’s best to blend the audio in and out quickly to reduce any noticeable quality change.

  • The VideoMic NTG has great radio interference (RF) rejection. How is this achieved?+
    • All RØDE microphones are tested extensively for interference from a wide range of devices. We make sure that the bodies are extremely well shielded and that the electronics aren’t susceptible to interference. Our state of the art RF test facilities allow us to put microphones through a wide range of RF simulations, which ensures our designs are robust and highly resistant to RF interference.

  • Is the VideoMic NTG's battery user-replaceable?+
    • The internal battery is not user-replaceable, however, the VideoMic NTG has a 10-year warranty once it has been registered. If there are any issues with the battery within this time frame, simply contact the RØDE support team and we'll happily help out. 

  • How do I use my VideoMic NTG with an iOS device with a Lightning connector, like an iPhone, iPad or iPod?+
    • To connect your VideoMic NTG to a Lightning-equipped iOS devices, such as an iPhone, iPad or iPod, you need to use the RØDE SC15 cable. Use this to connect the USB-C output of the microphone to the input of your device (please ensure you've updated your VideoMic NTG to the latest firmware to allow for this connection – you can download this here). You can also plug your VideoMic NTG into an iOS device using the 3.5mm output, however, using the USB-C output with the SC15 gives you access to a host of features including headphone monitoring, the safety channel, and two-way audio transmission for making video calls. We highly recommend this option.

  • Does the safety channel work with smartphones?+
    • The VideoMic NTG's safety channel should work if the VideoMic NTG is connected using the USB-C output of the microphone to the digital input of your device. Please note, this compatibility depends on your smartphone manufacturer. However, it does not function with devices with a TRRS input as they only support one channel of audio.

  • Will the VideoMic NTG work with my computer or tablet PC?+
    • The VideoMic NTG is a class-compliant device and will work directly with your computer or tablet PC. As a class-compliant USB device, you don’t need drivers or software for it to work. Simply plug it into your device, set it as your input source in your system preferences or recording software settings, and hit record.

  • Will the VideoMic NTG work with my Android smartphone?+
    • The VideoMic NTG is compatible with most Android smartphones that have USB-C. Compatibility depends on your smartphone manufacturer.


VideoMic NTG에 대한 질문 또는 지원 문의사항이 있으시면 연락처 페이지를 통해 저희에게 연락하시거나 지역 판매 업체를 방문하십시오.

호환 액세서리
관련 제품