스튜디오 음향, 단순화하다

NT-USB Mini는 RØDE의 세계적으로 유명한 스튜디오 마이크가 선사하는 깨끗한 음질을 작은 USB 플랫폼에 담았습니다. 녹음 작업에 따뜻하고 현장감 있는 음향을 제공하도록 특별히 제작되었으며, 대화, 보컬, 기타 등 앞에 놓인 모든 대상을 놀라운 사운드로 담아낼 것입니다.

스튜디오급 헤드폰 앰프와 고품질 3.5mm 헤드폰 출력이 특징이며 정밀한 음량 조절이 가능하여 오디오를 쉽게 모니터링할 수 있습니다. 레코딩 할 때 방해되는 에코를 제거하기 위해 변경할 수 있으며 제로 레이턴시 모니터링 모드도 지원합니다. 간단한 조작법, 내장된 팝 필터 및 드라이버나 소프트웨어 없이 컴퓨터나 태블릿에서 원활하게 작동하는 클래스 호환 USB 출력으로 설치 및 사용이 매우 쉽습니다. Mac, PC 또는 태블릿에 연결한 후 녹음 버튼을 누르면 됩니다.


NT-USB Mini mounted on PSA1+ in front of computer with RØDE Connect

유연한 사용성

NT-USB Mini는 사용자의 필요에 맞게 사용할 수 있도록 유연하게 설계되었습니다. 모든 데스크톱에 튼튼한 베이스가 되어줄 뿐 아니라 마이크 스탠드나 스튜디오 암에 쉽게 탈부착 할 수 있는 독특한 탈착식 마그네틱 데스크 스탠드가 특징입니다.이 독특한 360도 스윙 마운트로 마이크를 똑바로 세우거나 최상의 레코딩을 위해 필요한 특정 각도, 비스듬히 또는 뒤집을 수도 있습니다.

NT-USB Mini는 Twitch에서 스트리밍하거나 좋아하는 DAW에 녹음하거나 Zoom에서 업무상 전화를 걸 때 사용자가 고품질 음향을 들을 수 있도록 해줍니다.

NT-USB MIni mounted to PSA1 on white background

세련되고 컴팩트한 제품

NT-USB Mini는 모든 데스크톱 또는 홈 스튜디오 설정을 더욱 완벽하게 만들어 드립니다. 너비 89mm, 높이 141mm의 아주 컴팩트한 크기로 귀중한 데스크톱 공간의 극히 일부만 차지합니다. 깔끔한 라인과 현대적 아름다움을 담은 날렵하고 세련된 라인이 독보적입니다. 내구성이 뛰어난 강철과 강화 나일론 수지로 구조된 NT-USB Mini는 언제 어디서나 정밀한 레코딩 작업을 수행할 수 있습니다.

NT-USB Mini mounted on PSA1+ in front of computer with RØDE Connect

RØDE ConnectRØDE Connect

RØDE Connect is a simple and powerful software solution for podcasting and livestreaming with the NT-USB Mini.

Unlock the True Potential of the NT-USB Mini

RØDE Connect unlocks access to the NT-USB Mini’s in-built compressor, noise gate and legendary APHEX Aural Exciter and Big Bottom processors. Activated with a single click, each processor is optimised for the NT-USB Mini and will deliver an extra level of professional shine to your recordings.

Podcast the Easy Way

Connect up to four NT-USB Minis to a single Mac or PC without the need for complex routing or complicated software. Featuring an intuitive, fully featured recording interface, virtual channels for connecting remote guests, and automatic mix-minus on each channel for crystal-clear, echo-free communication, this is the easiest way to make a professional podcast.

Stream like a Pro

Together with the NT-USB Mini, RØDE Connect is a powerful solution for streamers and gamers who want to simplify their audio setup. Offering streamlined control over microphone audio and external applications, plus dedicated output controls for streaming apps like OBS or Xsplit, setting up livestream audio has never been easier.

Four NT-USB Minis connected to laptop via RØDE Connect

RØDE CentralRØDE Central

When your NT-USB Mini is connected to a computer via USB, its firmware can be updated with the RØDE Central app. Simply download and open RØDE Central, plug in your NT-USB Mini and the prompt will appear for permission to update your microphone firmware.

Note: This option is not available for RØDE Central on mobile.

NT-USB Mini connected to laptop via USB




자주 묻는 질문

Q.
Will the NT-USB Mini work with high-impedance headphones?
A.

The headphone amplifier in the NT-USB Mini is very powerful and easily capable of driving high-impedance headphones.

A.

Yes, the NT-USB Mini has an in-built pop filter for reducing plosives. This differs from the NT-USB which has an external pop filter.

A.

If you are still hearing an echo when you activate the zero-latency monitoring mode on the NT-USB Mini, you should mute your microphone channel output in your recording software.

Here’s an example. Let’s imagine you are adding the vocal track to a song. In your recording software, you have the other parts of the song - drums, guitar, bass and so on; you have created a track for the vocal and assigned the NT-USB Mini to this track to record. By default, your DAW will likely still be sending the output of the microphone back to the headphone along with the rest of the mix. You will hear this in addition as the zero-latency audio from the mic, meaning your voice might sound as if it has an echo or doubling effect on it.

To prevent this, mute the output of your vocal track in your software when you are recording the vocal. This means you will hear in your headphones two things - the full mix of the song, but without your voice, and the zero-latency monitor output of your voice. This makes for a more natural recording experience.

Once you’ve finished recording, don’t forget to unmute your vocal channel so you can listen to your song with the vocal track you just recorded in the mix. Also deactivate zero-latency monitoring so that you can edit your mix without any distracting sounds from the room being picked up by the mic and sent to your headphones.

A.

The NT-USB Mini is a condenser microphone, which means it is quite sensitive and capable of cleanly picking up audio further from the microphone. This makes it great for a wide variety of applications, from recording acoustic guitar to taking a video call while sitting at a desk. For singing, livestreaming or voiceover production, we recommend setting up the microphone around 10-15cm from the mouth to take advantage of the proximity effect. Placing the microphone closer to the sound source will also improve the voice-to-background-noise ratio.

A.

The NT-USB Mini is compatible with the PSA1+, DS1, Tripod and all RØDE boom poles.

A.

When you record into your computer, you usually want to monitor (listen to) what you are recording in your headphones. By default, the audio is sent from the microphone to your computer and is then processed by your recording software. It is then sent back to your headphones. The problem with this is that it takes a fraction of a second for your computer software to process the audio and send it back to the headphones which can cause a distracting delay – this delay is known as latency and will vary in length depending on your setup. This delay can make it very hard to perform naturally, whether you’re singing or speaking. The zero-latency monitoring mode removes this distracting delay. This is achieved by sending the output of the microphone directly to the headphones in real-time, bypassing the computer. This signal is accompanied by the output from your computer, so you can still hear the output (for example, your backing track if you are singing, or your game sound if you're streaming), but allows a more natural and comfortable listening experience (which results in a better performance).

To activate this mode, simply press the volume knob on the front of the NT-USB Mini. You will immediately hear the output of the microphone in your headphones. To deactivate this mode, simply click the volume knob again.

Note: When using zero-latency monitoring mode, you may want to mute your microphone channel output in your software while recording, so you only hear the rest of the mix. This will ensure the most natural and echo-free sound.

A.

The NT-USB Mini is more compact than the NT-USB. It also has an in-built pop filter, a magnetic base that is easily detachable, a 360-degree swing mount, and more streamlined, straightforward controls. This makes it a great portable, easy-to-use option. The NT-USB Mini also features built-in DSP that allows it to run the complex processes in RØDE Connect in real-time. 

The NT-USB features a removable pop shield, a locking thread base for mounting to external shock mounts, along with a monitor mix control knob to fine tune your mic input/device output mix. Both microphones deliver pristine, studio-quality audio.

A.

The NT-USB Mini will work with any device that supports class-compliant audio. This includes PCs, Macs, Android devices, and Lightning iOS devices when used with the camera connector kit. If there is a warning on your device that the mic draws too much power, then simply plug in the Lighting port of the adapter to a power supply.

A.

The knob on the NT-USB Mini is an output control for your headphone levels. It is not an input control - your input level must be set on your computer or recording device. This knob also activates zero-latency monitoring mode, which is enabled by pressing it and is indicated by the top left LED.

A.

The input level from the NT-USB Mini to your computer can be controlled through your system settings. For Mac, this will be in ‘Sound Preferences’ > ‘Input’ > ‘Input Volume'. For PC, it will be in ‘Recording Devices’ > click on “NT-USB Mini” > ‘Properties’ > ‘Levels’. The volume knob controls the output going to your headphones.

A.

RØDE Connect is an ideal audio solution for podcasting and livestreaming with the NT-USB+ and NT-USB Mini, but can be used for a wide variety of recording applications, such as recording a voiceover. 

A.

RØDE Connect is a simple and powerful software solution for podcasting and streaming with the NT-USB Mini. Offering an intuitive, fully featured recording interface, the ability to connect up to four NT-USB Minis to a single computer, seamless integration with video call and streaming applications, and access to the NT-USB Mini's internal compressor, noise gate and APHEX audio processors, RØDE Connect is the easiest way to record a podcast and livestream with incredible audio.

A.

There are many things you can do to get a clean recording with minimal spill between microphones. Try recording in the quietest place possible, ideally in a room with minimal reflective surfaces (such as floorboards). Place the microphones as far away from each other as possible, faced away from one another. Positioning each microphone less than six inches from you and your guests’ will also help to capture a clean signal (you may need to use a desk stand or studio arm like the RØDE DS1 or PSA1+ to achieve this).